|
[1]Kruth, J.-P. et al., “Progress in Additive Manufacturing and Rapid Prototyping”, CIRP Annals - Manufacturing Technology, Volume 47, Issue 2, 1998, Pages 525-540. [2]Bremen, S. et al., “Selective Laser Melting”, Laser Technik Journal, April 2012, No. 2. [3]Lü, L. et al., “Selective Laser Sintering” and “Metal-Based System via Laser Melting”, Chapter 5 and 6 in Laser-Inducted Materials and Processes for Rapid Prototyping, Springer Science+Business Media, New York, 2001, Pages 89-109 and Pages 143-152. [4]Murr, L.E. et al., “Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies”, Journal of Materials Science & Technology, Volume 28, Issue 1, January 2012, Pages 1-14. [5]Gibson, I. et al., “Directed Energy Deposition Processes”, Chapter 10 in Additive Manufacturing Technologies, Springer Science+Business Media, New York, 2015, Pages 245-368. [6]Anonymous, “工研院發表國內第一台金屬3D列印設備 金工飾品吸睛”, product introduction from工業技術研究院website, retrieved June 2015, https://www.itri.org.tw/chi/Content/NewsLetter/Contents.aspx?SiteID=1&MmmID=620605426331276153&MSid=653633446251642612 [7]Anonymous, “EOSINT M 280, eos”, product introduction from凱元商業有限公司website, retrieved June 2016, http://www.kaiyuan.com.tw/zh-tw/1-2684-72407/product/EOSINT-M-280-eos-id401369.html [8]曹哲之,科技部專題研究計畫書「彈性變向佈料高速3D成形技術」計畫編號MOST 103-2218-E-007-011,2014 (未公開文件)。 [9]Sachs, E. et al., “Production of Injection Molding Tooling With Conformal Cooling Channels Using the Three Dimensional Printing Process”, Polymer Engineering & Science, Volume 40, Issue 5, May 2000, Pages 1232-1247. [10]Xu, X. et al., “The Design of Conformal Cooling Channels in Injection Molding Tooling”, Polymer Engineering & Science, Volume 41, Issue 7, July 2001, Pages 1265-1279. [11]Dimla, D.E. et al., “Design and optimisation of conformal cooling channels in injection moulding tools”, Journal of Materials Processing Technology, Volumes 164-165, 15 May 2005, Pages 1294-1300. [12]Frick L., “The Difference Between Machined and 3D Printed Metal Injection Molds”, the news of Machine Design website, 23 June 2014, http://machinedesign.com/3d-printing/difference-between-machined-and-3d-printed-metal-injection-molds [13]Pal, D.K. and Ravi, B., “Rapid tooling route selection and evaluation for sand and investment casting”, Virtual and Physical Prototyping Journal 2 (4), 197-207, 2007. [14]張雲開,意鑫合金股份有限公司,私人聯訊。 [15]Amend, P. et al., “A fast and flexible method for manufacturing 3D molded interconnect devices by the use of a rapid prototyping technology”, Journal of Physics Procedia, Volume 5, Part B, 2010, Pages 561–572. [16]Yadroitsev, I. et al., “Parametric analysis of the selective laser melting process”, Applied Surface Science, Volume 253, Issue 19, 31 July 2007, Pages 8064-8069. [17]Anonymous, EOS (Germany) product brochure,數可科技公司(EOS代理), 2013台北國際光電展, 18 June 2013. [18]Lamikiz, A. et al., “Laser polishing of parts built up by selective laser sintering”, International Journal of Machine Tools & Manufacture 47 (2007) 2040–2050. [19]Anonymous, “Laser Deposition Technology (LDT), LENS® technology”, product introduction from RPM Innovations, Inc. website, retrieved November 2015, http://www.rpm-innovations.com/laser_deposition_technology [20]Anonymous, product introduction from OPM Laboratory website, retrieved November 2015, http://opmlabenglish.net/index.php?option=com_content&view=article&id=113:concept2013-2&catid=34:opm [21]楊文禮,科盛科技。 [22]鄭中緯,工業技術研究院南分院積層製造與雷射應用中心,國立清華大學動力機械工程學系演講,2013年10月15日。 [23]Anonymous, “3D列印新材料之創新製造技術”, the news from中華民國科技部website, retrieved October 2015, https://www.most.gov.tw/folksonomy/detail?subSite=&l=en&article_uid=63a1e492-144e-4012-b160-2ae287bd6b91&menu_id=9aa56881-8df0-4eb6-a5a7-32a2f72826ff&content_type=P&view_mode=listView [24]Skylar-Scott, M.A. et al., “Laser-assisted direct ink writing of planar and 3D metal architectures”, PNAS, Volume 113, Number 22, 31 May 2016, Pages 6137-6142. [25]Chen, Y. et al., “A layerless additive manufacturing process based on CNC accumulation”, Rapid Prototyping Journal, Volume 17, Issue 3, 2011, Pages 218-227. [26]Zinn, S. and Semiatin, S.L., “Introduction”, Chapter 1 in Elements of Induction Heating: Design, Control, and Applications, 2nd edition, Carnes Publication Services, USA, 1988, Pages 1-8. [27]Wikipedia, “Gas tungsten arc welding”, 2015. [28]Wikipedia, “Plasma arc welding”, 2015. [29]Dzelnitzki, D., “Plasma welding of aluminium materials Direct or alternating current?”, EWM HIGHTEC WELDING GmbH, retrieved May 2016. [30]Anonymous, “Plasma Welding”, the information from龍華高特焊接商行website, retrieved November 2015, http://plasmawelding.myweb.hinet.net/link.htm [31]Anonymous, “The Plasma Arc Welding Process”, product introduction from Pro-Fusion website, retrieved November 2015, http://www.pro-fusiononline.com/welding/plasma.htm [32]Pro-Fusion, “MANUAL DUAL ARC 82 HFP - E&H -MARCH 2014”, instruction manual of the DUAL ARC 82 HFP machine, March 2014, http://www.pro-fusiononline.com/products/micro_plasma_micro_tig.htm [33]Kalpakjian, S. and Schmid, S., “Joining Processes and Equipment”, Chapter 30 in Manufacturing Engineering and Technology, 6th edition, Prentice Hall, Singapore, 2010, Pages 870-871. |