|
[1].D. Linden et al., Handbook of Batteries, 3rd edition, McGraw-Hill, 2002. [2].衣寶廉, "燃料電池-原理與應用," 五南書局, 2007. [3].R.Padbury et al., “Lithium Oxygen batteries Limiting factors that affect performance,” Journal of Power Sources, Vol. 196, pp. 4436-4444, 2011. [4].V. Baglio et al., “AC-Impedance Investigation of Different MEA Configurations for Passive-Mode DMFC Mini-Stack Applications,” Fuel Cells, Vol. 10, No. 1, pp. 124-131, 2010. [5].Chang.I et al., “Performance evaluation of passive direct methanol fuel cell with methanol vapour supplied through a flow channel,” J. Power Sources, Vol. 184, No. 1, pp. 9-15, 2008. [6].M.Tsuchiya et al., “Scalable nanostructured membranes for solid-oxide fuel cells,” Nat. Nanotechnol, Vol. 6, pp. 282-286, 2011. [7].Saha, M. S, et al., “High loading and monodispersed Pt nanoparticles on multiwalled carbon nanotubes for high performance proton exchange membrane fuel cells,” J. Power Sources, Vol. 177, No. 2, pp. 314-322, 2008. [8].黃鎮江, "燃料電池," 全華科技圖書股份有限公司, 2003. [9].Kelley, S.C et al., “Miniature fuel cells fabricated on silicon substrates,” AIChE Journal, Vol 48, pp. 1071-1082, 2002. [10].K. Shah et al., “ Novel microfabrication approaches for directly patterning PEM fuel cell membranes,” Journal of Power Sources, Vol 123, pp. 172-181, 2003. [11]. Xiao, Z, et al., “A silicon-based fuel cell micro power system using a microfabrication technique,” Journal of Micromechanics and Microengineering, Vol 16, pp. 2014–2020, 2006. [12].M. Shen et al., “Monolithic micro-direct methanol fuel cell in polydimethylsiloxane with microfluidic channel-integrated Nafion strip,” Journal of Power Sources, Vol 193, pp.761–765, 2009. [13].Wong, W. S. et al., “Flexible Electronics: Materials and Applications,” Springer, New York, 2009. [14]Satoshi, T, et al., “Bendable fuel cells: on-chip fuel cell on a flexible polymer substrate“ Energy & Environmental Science, No. 2, pp. 1074–1077, 2009 [15]Takeshi, I, et al., “Characteristics of micro DMFCs array fabricated on flexible polymeric substrate“Electrochemistry Communications, No. 8, pp. 973–976, 2006 [16].Ikwhang, C, et al., “Air-breathing Flexible Polydimethylsiloxane (PDMS)-based Fuel Cell“ International Journal Of Precision Engineering And Manufacturing Vol. 14, No. 3, pp. 501-504, 2013 [17].Kim, D. H, et al., “Stretchable and Foldable Silicon Integrated Circuits,” Science, Vol. 320, No. 357, pp. 507-511, 2008. [18].Lu, X, et al., “Electronic materials: Buckling down for flexible electronics,” Nat. Nanotechnol, Vol. 1, pp. 163-164, 2006. [19].Siegel, A. C, et al., “Microsolidics: Fabrication of Three-Dimensional Metallic Microstructures in Poly(dimethylsiloxane),” Adv. Mater, Vol. 19, No. 5, pp. 727-733, 2007. [20].Siu, C. P. B, et al., “A Microfabricated PDMS Microbial Fuel Cell,” Journal of Microelectromechanical Systems, Vol. 17, No. 6, pp. 1329-1341, 2008. [21].Shyh, C. K, et al., “A Novel Polymer Microneedle and PDMS Micromolding Technique,” Tamkang Jurnal of Science and Engineering, Vol. 7, pp. 95-98, 2004. [22].Keyur, S, et al., “A PDMS micro proton exchange membrane fuel cell by conventional and non-conventional microfabrication techniques”, Sensors and Actuators B, Vol. 97, pp. 157–167, 2004 [23].Guisheng Zhuang et al., “Anti-stiction coating of PDMS moulds for rapid microchannel fabrication by double replica moulding”, Journal of Micromechanics and Microengineering,Vol. 21, No. 10, 2011 [24].P. C. Wang et al., “Transparent electrodes based on conducting polymers for display applications”, Displays, Vol. 34, pp. 301–314, 2013 [25].Ikjoo, B, et al., “Transfer of thin Au films to polydimethylsiloxane (PDMS) with reliable bonding using (3-mercaptopropyl)trimethoxysilane (MPTMS) as a molecular adhesive”, Journal of Micromechanics and Microengineering, Vol. 23, No. 8, 2013
|