|
[1] A. N. Starodumov, L. A. Zenteno, D. Monzon and E. De La Rosa, "Fiber Sagnac interferometer temperature sensor, " Applied Physics Letters, vol.70,no.1,pp.19-21,1997
[2] H. Liang, Y. Jin, Y. Zhao and J. Wang, "Twist sensor by using a pressure-induced birefringence single mode fiber based Sagnac Interferometer, " Asia Communication and Photonics Conference, vol.8311,83112H,Shanghai,China,2011
[3] J. Wang, C. Shen., Y. Lu, D. Chen and C. Zhong, "Liquid Refractive Index Sensor Based on a Polarization-Maintaining Fiber Loop Mirreo, "IEEE Sensors Journal, vol.13,no.5,pp. 1721-1724,2013.
[4] T. Wang, C. Luo and S. Zheng, " A fiber-optic current sensor based on a differentiating Sagnac interferometer, " IEEE Transactions on Instrumentation and Measurement , vol.50,no.3,pp. 705-708,2001
[5] O. Frazão, R. Falate, J. L. Fabris, J. L. Santos, L. A. Ferreira, F. M. Araújo,” Optical inclinometer based on a single long-period fiber grating combined with a fused taper,” Optics Letters, Vol. 31 ,Issue: 20 ,pp.2960-2962,2006
[6] Wei,Liang, Yanyi,Huang, Yong,Xu, Reginald K. Lee, and Amnon Yariv,”Highly sensitive fiber Bragg grating efractive index sensors,” Applied Physics Letters, Appl. Phys. Lett. 86, 151122 ,2005
[7] Dipankar Sengupta; Putha Kishore,” Continuous liquid level monitoring sensor system using fiber Bragg grating,” Optical Engineering, Vol.53(1), 2014
[8] Zhou, Xinlei; Yu, Qingxu; Peng, Wei , " Fiber-optic Fabry-Perot pressure sensor for down-hole application, " Optics and Lasers in Engineering ,vol.121,pp. 289-299 ,2019
[9] Mohammed, Anees; Melecio, Juan I.; Djurovic, Sinisa, " Stator winding fault thermal signature monitoring and analysis by in situ FBG sensors, " IEEE Transactions on Industrial Electronics ,Vol66. No.10, pp.8082-8092 ,2019
[10] Allwood, Gary; Wild, Graham; Lubansky, Alex; et al., " A highly sensitive fiber Bragg grating diaphragm pressure transducer, " Optical Fiber Technology,Vol.5,pp. 25-32 ,2015
[11] Xiangyang, Deng; Guanghua, Chen; Qixian, Peng; et al., " Research on the fiber Bragg grating sensor for the shock stress measuremen, " Review of Scientific Instruments ,Vol.8. No.10 ,pp.103-109,2011
[12] Signorini, A., Faralli, S., Soto, M. A., Sacchi, G., Baronti, F., Barsacchi, R., ... & Di Pasquale, F.. “40 km long-range Raman-based distributed temperature sensor with meter-scale spatial resolution. ”Optical Fiber Communication Conference (p. OWL2),2010
[13] Knight, JC; Birks, TA; Russell, PS; et al., "All-silica single-mode optical fiber with photonic crystal cladding, " Optics Letters ,Vol.21. No. 19 ,pp.1547-1549,1996
[14] Matthew J. Murray, Allen Davis, Brandon Redding, " Multimode fiber Φ-OTDR with holographic emodulation, " Optics Express, Vol. 26, No. 18, pp.23019-23030,2018
[15] Cheng, Li ;Xiaobin, Peng; Jian, Liu; Chao , Wang; Shangchun ,Fan ; Shaoqing , Cao,” D-Shaped fiber bragg grating ultrasonic hydrophone with enhanced sensitivity and bandwidth,” Journal of Lightwave Technology,Vol: 37 ,Issue: 9 , pp. 2100-2108,2019
[16] Zetang, Li; Zhong Lin, Wang,”Air/Liquidpressure and heartbeat-driven flexible fiber nanogenerators as a micro/nano-power source or diagnostic sensor,” Advanced Materials, Vol: 23 ,Issue: 1 , pp.84-89,2011
[17] T.H.T. Chan, L. Yu, H.Y. am, Y.Q. Ni, S.Y. Liu, W.H. Chung, L.K. Cheng, "Fiber bragg grating sensors for structural health monitoring of Tsing Ma ridge: Background and experimental observation, "Engineering Structures Vol. 28,pp.648-659,2006
[18] Tomasz Osuch ; Konrad Markowski ; Kazimierz Jedrzejewski,” Temperature independent tapered fiber bragg grating-based inclinometer,” IEEE Photonics Technology Letters, Volume: 27 , Issue: 21 , Page(s): 2312 – 2315,2015
[19] Mousumi Majumder, Tarun Kumar Gangopadhyay, Ashim Kumar Chakraborty,Kamal Dasgupta, D.K. Bhattacharya,” Fibre bragg gratings in structural health monitoring-Present tatus and applications,” Sensors and Actuators A: Physical,Vol.147,pp.150-164,2008
[20] Sheng Liang, Xinzhi Sheng, Shuqin Lou,Yan Feng, Kangning Zhang,” Combination of phase-sensitive OTDR and Michelson interferometer for nuisance alarm rate reducing and event identification,” IEEE Photonics Journal, Vol. 8, Number 2, 2016
[21] A. Bjarklev, “Optical fiber amplifiers: Design and system applications”, Artech House, Inc, 1993.
[22] Chtcherbakov, A. A., Swart, P. L., Spammer, S. J., & Lacquet, B. M.. " Modified Sagnac/Mach-Zehnder interferometer for distributed disturbance sensing. " Fourth Pacific Northwest Fiber Optic Sensor Workshop, Vol. 3489, pp. 60-65,1998
[23] Hill, K. O., Fujii, Y., Johnson, D. C., & Kawasaki, B. S.. "Photosensitivity in optical fiber waveguides: Application to reflection filter abrication. "Applied Physics Letters, 32(10), 647-649.
[24] Y. Jeong, S. Yoo, C. A. Codemard, J. Nilsson, J. K. Sahu,D. N. Payne, R. Horley, P. W. Turner, L. M. B. Hickey, A.Harker, M. Lovelady, and A. Piper, “Erbium: ytterbium codoped large-core fiber laser with 297 W continuous-wave output power,” IEEE J. Sel. Top. Quantum Electron. 13, 573–579 ,2007
[25] Y. Sun, J. L. Zyskind, and A. K. Srivastava, “Average inversion level, modeling, and physics of erbium-doped fiber amplifiers”, IEEE Journal of selected topics in quantum electronics, vol.3, no.4, pp.991-1007, 1997.
[26] E. Snitzer, “Optical maser action of Nd+3 in a baeium crown glass”, Physical Review Letters, vol.7, no.12, pp.444, 1961
[27] M. A. Jebali, J.-N. Maran, S. LaRochelle, S. Chatigny, M.-A. Lapointe, and E. Gagnon, “A 103 W high efficiency in-band cladding pumped 1593 nm all fiber erbium-doped fiber laser,” Conference on Lasers and Electro-Optics, OSA Technical Digest (online), paper JTh1I.3.,2012
[28] E. Lim, S. Alam, and D. J. Richardson, “Optimizing the pumping configuration for the power scaling of in-band pumped erbium doped fiber amplifiers,” Opt. Express 20, 13886–13895,2012
[29] Y. Sintov, O. Katz, Y. Glick, S. Acco, Y. Nafcha, A. Englander, and R. Lavi, “Extractable energy from ytterbium-doped high energy pulsed fiber amplifiers and lasers,” J. Opt. Soc. Am. B 23, 218–230 ,2006
[30] J. Limpert, F. Roser, D. N. Schimpf, E. Seise, T. Eidam, S.Hadrich, J. Rothhardt, C. J. Misas, and A. Tunnermann, “High repetition rate gigawatt peak power fiber laser systems: challenges, design, and experiment,” IEEE Journal of Selected Topics in Quantum Electronics, Volume: 15 , Issue: 1 ,Page(s): 159 – 169,2009
|